An innovative and effective water mixing device.
IDRAFLOT® are intended to assure a perfect mixing of the waste with saturated water and an uniform distribution of the water flow along the entire surface of the unit made possible by their innovative modular design.
IDRAFLOT® flotation units have mixing volumes intended to optimize the process and the unit’s total capacity.
IDRAFLOT® units allow for enhanced thickening and clarification performance. This creates an increased removal of insoluble COD, suspended solids, and FOG (fats, oils, and grease).
IDRAFLOT® flotation units are protected by three patents. They are intended to assure a perfect mixing of the waste with saturated water and a uniform distribution of the water flow along the entire surface of the unit.
It is provided with lamellar packs, to achieve high treatment capacity compared to its compact size, telescopic level adjustment to optimize the sludge extraction with dry matter up to 8%.
The saturation system warrants a complete and even saturation free from formation of big bubbles.
IDRAFLOT® are very compact flotation units which boast the lowest chemicals consumption within the category.
FEATURES & BENEFITS
Idraflot® is a compact unit that is easily transportable and manufactured entirely in stainless steel.
IDRAFLOT® are intended to assure a perfect mixing of the waste with saturated water and an uniform distribution of the water flow along the entire surface of the unit made possible by their innovative modular design. Tanks are, in fact, designed by modules. The opportunity to replicate the same module along the whole structure of the unit gives benefits in terms of process stability allowing the blowing of the air not just from one point, as in the traditional systems, but along the whole surface of the unit and from both sides of it. This peculiarity makes IDRAFLOT® a multi-flotation system with more stable and effective performances.
Each module acts as a double flotation unit.
An innovative system
In addition, IDRAFLOT® flotation units have mixing volumes intended to optimize the process and the unit global handling. Global volume reduction is intended to: reduce chemical additive dosingreduce the saturated water flow rate (up to 50% less compared to the conventional models) avoid hydraulic short circuitsreduce the unit management costs Furthermore, a compact and modular structure makes transport and any future re-placing easier.
Idraflot® is the result of more than 30 years of experience in wastewater treatment.
DRAFLOT® are very compact flotation units which boast the lowest chemicals consumption within the category. These units reach a very high thickening and clarification grade with the highest removal efficiency on suspended solids, oils and grease, and not soluble COD.
- Wastewater Treatment Process Pre-treatment
- Wastewater Treatment Process Tertiary Treatment (P removal)
- Wastewater Treatment Process Sludge Thickening
- MBBR Post treatment Sludge Separation
- Rain water, floor cleaning
- Pure Water and Wastewater Filter Back Wash treatment
INDUSTRIES OF APPLICATIONS:
- Food & Beverage
- Pulp & Paper
- Biogas & Biofuels
- Mining & Primary Metals
- Oil & Gas
- Mechanical and Surface Treatments
|Units||Modules||Treatment capacity||Dimensions LxDxH (mm)||Dimensions LxDxH (inch)|
|IFS 6||-||5-10||22-44||4600 x 1910 x 2260||181 x 75 x 89|
|IFS 15||-||6-25||26-110||5200 x 2040 x 2300||205 x 80 x 91|
|IFS 40||2||28-80||123-352||7170 x 2640 x 3260||282 x 104 x 128|
|IFS 60||3||42-120||185-528||8170 x 2640 x 3260||322 x 104 x 128|
|IFS 80||4||56-160||246-704||9240 x 2640 x 3260||364 x 104 x 128|
|IFS 100||5||70-200||308-880||10.170 x 2750 x 3260||400 x 108 x 128|
|IFS 120||6||80-240||352-1057||11.170 x 2750 x 3260||440 x 108 x 128|
|IFS 140||7||100-280||440-1233||12.220 x 2750 x 3260||481 x 108 x 128|
|IFS 180||9||126-360||555-1585||14.290 x 2830 x 3260||563 x 111 x 128|
|IFS 200||10||140-400||616-1761||15.290 x 2830 x 3260||602 x 111 x 128|
|IFS 240||12||168-480||740-2113||17.290 x 2830 x 3260||681 x 111 x 128|